Henny Penny FlexFusion FSE-610 Installation Manual page 39

Electrical connections made properly?
Residual-current protective device connected immediately before this unit?
Residual-current protective device connected before this and other units?
Software version identified?
Version: __________
Date and time set?
Installation altitude set?
0 - 999 m ( 0-.6 mi)
2000 - 2499 m (1.2 – 1.6 mi)
Audio settings (audible signal volume) set?
Signal tone selected?
Units set?
°C
Network configuration set?
DHCP
Subnet Mask:
____________________________
Kitchen control system set?
active
Ethernet
TCP Port: __________
Unit Address: __________
80% output set?
100%
Electrical connection
Basic control setting
1000 - 1999 m (.6 – 1.2 mi)
>2500 m (1.6 mi +)
°F
IP Address: ____________________________
Gateway: ____________________________
blocked
serial
Unit Address: __________
80%
Putting the unit into service
Filling out the commissioning report
8
Yes No
Yes No
39