Advertisement
NCO (North Coil Out) - This solder pad is used for position-2 in 5-way switch wiring for
combining the neck north coil with the bridge south coil, utilizing the bridge preamp
in Voice-3.
5. +9-18V - This is the + dc power input pin. Fluence pickups are designed to have a
wide dynamic range running from a 9V supply, however they are 18V compatible for
instruments already set up that way.
6. Output - The main output pin has a 2k ohm output impedance and is suitable for
driving low impedance volume and tone pots, typically 25k.
Wiring diagrams are available at Fishman.com
9
Advertisement
