Advertisement
2. Single Coil / Voice-3 Select Wire - To select Voice-3, connect this
pin to ground through a switch contact.
In Single Coil mode, the default active coils are those closest to the neck (screw side
for neck and slug side for bridge). The Tim Henson signature set is designed such that
using the neck side coils from both pickups together will provide hum canceling. With
the standard wiring scheme, position-2 utilizes the Bride pickup in Single Coil / Voice-3
mode and combines with the Neck pickup screw side coil via the NCO & SCO solder
pads. See note (4) for details on the NCO & SCO solder pads.
When selected, Single Coil / Voice-3 mode overrides the status of Voice-1 or 2.
7
Advertisement
