Summary of Contents for Fishman NEO-BUSTER PRO-NEO-FB2
Page 1
www.fishman.com USER GUIDE NEO-BUSTER ® SOUNDHOLE PICKUP...
Page 2
Requirements The Neo-Buster is designed to fi t most steel string, at-top guitars with a 4 inch (10.16cm) diameter soundhole. We recommend you string your guitar with bronze or phosphor bronze strings to achieve the correct response from the pickup. Description This passive magnetic pickup produces the bright, shimmering qualities associated with single coil pickups.
Page 3
Setup Tuck the cable into the cable strain relief opening. Allow for some slack so that the cable is not bent at the underside of the pickup housing. With the guitar’s strings in place, slide the Neo-Buster under the strings until it drops into the soundhole, parallel to the end of the fi ngerboard.
Page 4
Fishman, Fishman Transducers and Neo-Buster are all trademarks, registered trademarks or trade names of Fishman Transducers, Inc. 513-300-196 Rev A 5-12...