Wv-Cu360Cj System Controller (Terminal Mode) - Panasonic WJ-SX150 Operating Instructions Manual

WV-CU360CJ System Controller (TERMINAL MODE)

A template, on which "For Matrix Switcher (WJ-SX150)" is written, is provided with System Controller WV-CU360CJ. When
using the template, place it on the surface of the controller.
&3
&4
&5
&6
&8
&7
&9
*1
*0
*4
%3 Operation indicator (OPERATE)
Lights up when the controller's power is turned on.
%4 Link indicator (LINK)
Lights up when communication is established with the
matrix switcher.
%5 Alarm indicator (ALARM)
Lights up when an alarm condition exists.
%6 Monitor indicator (MONITOR)
Lights up when the monitor number appears on the
LED display.
%7 LED Display
Displays the monitor number, camera number, numeric
entry and error status, etc.
%8 Camera indicator (CAMERA)
Lights up when the camera number appears on the
LED display.
29
%3 %4 %5 %6 %7
OPERATE LINK ALARM
MONITOR
F1 ACK RESET
CAM SETUP SUSPEND ALL RESET
F2 GROUP SEQ TOUR SEQ
T&D
INDEX REW/FF STILL
PREV NEXT
MON STATUS
STEP EL-ZOOM
RECORDER
STOP PAUSE
ALM H
SEQUENCE
STOP PLAY PAUSE
MON (ESC)
OSD
MON LOCK
SETUP SHIFT
*7 *3 *6 *2 *5 &2
%8 %9 ^0
BUSY PROHIBITED
CAMERA
IRIS
CLOSE
AUTO IRIS
CALL
FOCUS
PRESET
CAM ID EVENT
NEAR
AUX1 OFF AUX1 ON PROGRAM
AUTO FOCUS
PRESET
ALL
ZOOM
AUTO PAN
AUX2 OFF AUX2 ON
WIDE
VLD H SYS S
CAM FUNC
REC
DEF OFF DEF ON
CAM (SET)
CLEAR
WIPER LOG OUT
MULTI SCREEN SEL
&1 &0 ^9 ^8 ^7 ^6 ^5 ^ 4
%9 Busy indicator (BUSY)
Lights up when the higher-priority operator selects the
camera or monitor you are currently operating.
Operations from the system controller are disabled until
this indicator goes off.
^0 Prohibited indicator (PROHIBITED)
Blinks when an operator attempts to control a monitor
(or camera) that is already used by a higher-priority
operator or the operator has done the prohibited opera-
tion.
^1 Zoom wheel controller
This control is used for zooming cameras equipped
with the specific lens. Moving the control to the right will
zoom in the image. Moving the control to the left will
zoom out the image.
^1
360
System Controller WV-CU CJ
For Matrix Switcher (WJ-SX150)
OPEN
FAR
TELE
^3
^2