Resetting The Alarm Inputs; Suspending The Alarm Inputs - Panasonic WJ-SX150 Operating Instructions Manual

Resetting the Alarm Inputs

There are two alarm reset functions:
• Alarm reset (resetting the alarm inputs according to the
input order)
• Alarm all reset (resetting all the alarm inputs)
RESET
ALL RESET
TOUR SEQ
Alarm Reset
1. Select a monitor which displays "ALARM".
2. When more than one alarm signal has been input, the
second earliest alarm image appears on the monitor,
after the current alarm image is reset.
3. To reset all the alarms, repeat steps 1 and 2. The moni-
tor, the LED display and the indicator will change as fol-
lows:
"ALARMnn" will disappear from the monitor.
The LED display will return to the state before the
alarm input.
The alarm indicator will go out.
The CAM indicator will return to the state before the
alarm input.
• Description about alarm reset
Alarm
input 5
Alarm
input 1
Matrix switcher
Note: When more than one alarm is input and they are
associated with the same monitor, they will be reset one
by one.
103
T&D CAM ID EVENT
AUX1 OFF AUX1 ON
STILL
Time
Alarm
input 2
ALARM01*
Monitor 1
RESET
ALL RESET
ALARM05*
RESET
ALL RESET
ALARM02
Monitor 1
Alarm All Reset
RESET
ALL RESET
TOUR SEQ
T&D
STILL
NEXT
MON STATUS
EL-ZOOM
PAUSE
ALM H
PAUSE SEQUENCE
MON (ESC)
MON LOCK
SHIFT
1. Press the RESET button while holding down the SHIFT
button.
2. The monitor, the LED display and the indicator will
change as follows:
"ALARMnn" will disappear from the monitor.
The LED display will return to the state before the
alarm input.
The alarm indicator will go out.
The CAM indicator will return to the state before the
alarm input.

Suspending the Alarm Inputs

Use this function when you do not want to be disturbed by
an alarm input, for example, during the setup procedures.
ACK RESET
SUSPEND ALL RESET
GROUP SEQ TOUR SEQ
T&D CAM
REW/FF STILL AUX1 O
ALM SUSPENDED
PREV NEXT
MON STATUS ALL
AUX2 O
STEP EL-ZOOM
PAUSE
ALM H VLD
DEF O
PLAY PAUSE SEQUENCE
MON (ESC)
OSD
MON LOCK
SHIFT MULTI SCRE
1. Press the ACK/SUSPEND button while holding down
the SHIFT button.
"ALM SUSPENDED" will appear on the monitor.
2. To cancel alarm suspension, press the ACK/SUSPEND
button while holding down the SHIFT button again.
"ALM SUSPENDED" will disappear from the monitor.
Notes:
• An alarm continues to operate even after it is suspend-
ed.
• If you suspend an alarm while an alarm image is dis-
played, "ALM SUSPENDED" will not appear on the moni-
tor. Reset the alarm, and then suspend it again.
CAM ID EVENT
AUX1 OFF AUX1 ON
ALL
AUX2 OFF AUX2 ON
VLD H SYS S
DEF OFF DEF ON
CAM (SET)
WIPER
MULTI SCREEN SEL