Time-Lapse Vcr Control (Ps·data); Controlling The Time-Lapse Vcr With A Ps·data System Controller - Panasonic WJ-SX150 Operating Instructions Manual

TIME-LAPSE VCR CONTROL (PS·DATA)
This section will describe what you should take notice when using a PS·Data system controller.
The same descriptions as those of digital disk recorders are not mentioned here. Refer to p.xx for details.
Notes:
• Before the use, it is necessary to install the Multiplexer board in the matrix switcher, connect the matrix switcher to the
time-lapse VCR, and configure the system through WJ-SX150 Administrator Console, OSD SETUP MENU, and time-lapse
VCR's SETUP MENU. [Refer to p. 34 Installing the Multiplexer Board, p. 45 Connection with the Time-lapse VCR
(Panasonic Models), p. 52 WJ-SX150 SETUP MENU (OSD), and p. 64 WJ-SX150 ADMINISTRATOR CONSOLE.]
• The time-lapse VCR's SETUP MENU cannot be displayed from a system controller.
Controlling the Time-lapse VCR with a PS·Data System Controller
Function
Forward field advance
Backward field advance
Pause
Playback
Recording
Stop recording/playback
126
Code
1
2
4
5
6
8