Wv-Cu360C/Cu360Cj System Controller (Terminal Mode) - Panasonic WJ-SX 150A Operating Instructions Manual

WV-CU360C/CU360CJ System Controller (TERMINAL MODE)

A template, on which "For Matrix Switcher (WJ-SX150A)" is written, is provided with a system controller. When using the tem-
plate, place it on the surface of the controller.
In these operating instructions, this template's illustrations are used for descriptions.
Front View (WV-CU360C)
@0
OPERATE
#8
#9
F1
$0
CAM SETUP
$1
F2
$3
$2
INDEX
$4
$6
RECORDER
$5
STOP
$9
STOP
SETUP
%2 $8 %1 $7 %0
@0 Operation indicator (OPERATE)
Lights up when the controller's power is turned on.
@1 Link indicator (LINK)
Lights up when communication is established with the
matrix switcher.
@2 Alarm indicator (ALARM)
Lights up when an alarm condition exists.
@3 Monitor indicator (MONITOR)
Lights up when the monitor number appears on the
LED display.
@4 LED Display
Displays the monitor number, camera number, numeric
entry and error status, etc.
@5 Camera indicator (CAMERA)
Lights up when the camera number appears on the
LED display.
@6 Busy indicator (BUSY)
Lights up when the higher-priority operator selects the
camera or monitor you are currently operating.
Operations from the system controller are disabled until
this indicator goes off.
26
@1 @2 @3 @4 @5
LINK ALARM MONITOR CAMERA
ACK RESET
SUSPEND ALL RESET
GROUP SEQ TOUR SEQ
T&D CAM ID EVENT
REW/FF AUX1 OFF AUX1 ON
STILL
PREV NEXT
MON STATUS ALL
AUX2 OFF AUX2 ON
STEP EL-ZOOM
PAUSE
ALM H VLD H SYS S
DEF OFF DEF ON
PLAY PAUSE SEQUENCE
MON (ESC) CAM (SET)
OSD
SHIFT MON LOCK MULTI SCREEN SEL WIPER
#7 #6 #5
@6 @7
BUSY PROHIBITED
System Controller WV-CU
For Matrix Switcher (WJ-SX150A)
IRIS
CLOSE OPEN
UP
AUTO IRIS
CALL
FOCUS
PRESET
NEAR FAR
PROGRAM
AUTO FOCUS
PRESET
L
ZOOM
AUTO PAN
WIDE TELE
CAM FUNC
REC
DOWN
CLEAR
LOG OUT
#2 @9
#4 #3 #1 #0 @8
@7 Prohibited indicator (PROHIBITED)
Blinks when an operator attempts to control a monitor
(or camera) that is already used by a higher-priority
operator or the operator has done the prohibited opera-
tion.
@8 Joystick
Use this joystick to manually operate cameras, camera
site accessories and a recorder, or to move the cursor
in SETUP MENU on the active monitor screen.
UP: Up
DOWN: Down
Left, rewind*, backward field advance*
L:
R: Right, fast-forward*, forward field advance*
*Available after pressing the RECORDER button while
connecting to a recorder.
@9 Iris buttons (IRIS CLOSE/OPEN)
Close or open the lens iris of cameras equipped with
the specified lens.
Press the CLOSE and OPEN buttons simultaneously.
The lens iris is reset to the factory default setting.
Front View (WV-CU360CJ)
%3
360
360
tem Controller WV-CU
C
r Matrix Switcher (WJ-SX150A)
R
%5
CJ
%4