Cleaning And Maintenance - Dometic Track Large Installation And Operating Manual

Cleaning and maintenance

I
NOTE
The motors have a built-in, self resetting thermal cut-out for safety rea-
sons. Prolonged use or over loading the blind could trigger the cut-out.
If this happens allow the motor to cool for up to 30 minutes.
9 Cleaning and maintenance
!
WARNING! Risk of injury
Powered blinds: Take appropriate organizational measures for pre-
venting operation of the blind when maintenance, such as window or
wall cleaning, is being carried out in the vicinity, for blinds, which can be
operated from a position without the blind in view.
A
NOTICE! Damage hazard
• Do not grease, oil or lubricate the blind. Lubricants will damage the
fabric.
• Rubbing can damage the fabrics.
• Spot-cleaning may result in cleaner areas than the surrounding.
• Do not soak the blinds.
• The manufacturer recommends testing any cleaning agents on a
hidden area of the blind first.
➤ Proceed as shown to clean the blind.
30
Track Large
EN