Cleaning And Maintenance - Dometic Oceanair Skysol Track Small Manual Installation And Operating Manual

Skysol Track Small
0
I
NOTE
The motors have a built-in, self resetting thermal cut-out for safety reasons. Pro-
longed use or over loading the blind could trigger the cut-out. If this happens
allow the motor to cool up to half an hour.
9

Cleaning and maintenance

A
NOTICE! Damage hazard
• Do not grease, oil or lubricate the blind. Lubricants will damage the fabric.
• Rubbing can damage the fabrics.
• Spot-cleaning may result in cleaner areas than the surrounding.
• Do not soak the blinds.
• The manufacturer recommends testing any cleaning agents on a hidden
area of the blind first.
➤ Proceed as shown to clean the blind.
EN
Cleaning and maintenance
19