Figure 9. VEP1400 wall mount bracket installation - keyhole cutout
Rack-mounted installation
As an option, the VEP1400 can be mounted to a dual rack mount tray. Purchased
separately, you can install the VEP1400 to the dual rack mount tray using a torque
screwdriver and the eight M3 screws included.
NOTE: When driving the screws into the bracket and VEP1400 unit, verify that 5
lb-in is the achieved torque setting.
NOTE: If mounting the VEP1400 to a dual rack mount tray, removal of the rubber
feet from the bottom of the VEP1400 unit is not necessary.
Figure 10. VEP1400 rack mount installation
18