Dell EMC VEP1400 Getting Started Manual page 16

Figure 5. VEP1400 M3 screw installation points
After the brackets have been attached to the VEP1400 unit and the screws that are
mounted into the wall, place the brackets over the screws and slide the unit to one side to
secure the unit in place.
WARNING: When mounting the VEP1400 unit to the wall, ensure that unit is
mounted with the parallel ports in the upward position, and where the LED panel
faces the floor.
Figure 6. VEP1400 wall mount bracket installation - cross-shaped cutout
Wall mount bracket with keyhole cutout for the mounting screws
16