N-Com B901 Manual

N-COM B901 & TOM TOM RIDER II
B901 AND TOM TOM RIDER II
The B901 system is compatible via Bluetooth with the TOM TOM RIDER II. After pairing up and connecting the navigator
to the N-Com system, you will be able to hear the signals coming from the Tom Tom in your helmet.
For best results, it is recommended to download the latest available Firmware version of the satellite navigator and of the
N-Com system.
GENERAL INFORMATION
PAIRING UP
For the pairing up procedure between N-Com and navigator, please refer to the user manual of the N-Com system,
chapter " Managing two mobile phones (or Bluetooth devices) ".
N.B.: For proper management of the various devices, the navigator must always be paired up with the N-Com system as
Managing two mobile phones (or
a SECONDARY DEVICE (please refer to the user manual of the N-Com system, chapter "
Bluetooth devices
").
CONNECTION
Once the GPS has been paired up, connection takes place automatically upon switching on the B901 system.
INDIVIDUAL USE
The navigator must be paired up and connected to the rider helmet only, following the instructions provided in the
"General" section.
GPS INDICATIONS
After pairing up and connecting the navigator to the N-Com system, you will be able to hear the audio signals coming
from the TOM TOM RIDER II in your helmet.
MOBILE PHONE
For proper management of the various devices, the mobile phone must be paired up to the N-Com system as MAIN
DEVICE.
For proper operation of all devices involved, it is recommended to NOT pair up and connect the mobile phone and
navigator one to the other.
Incoming calls temporarily interrupt the connection with the navigator.
MUSIC
FROM THE NAVIGATOR
: Currently being tested.
FROM THE MOBILE PHONE : Currently being tested.
1