N-Com B902L User Instructions And Safety
  1. Manuals
  2. Brands
  3. N-Com Manuals
  4. Motorcycle Accessories
  5. B902L
  6. User instructions and safety

N-Com B902L User Instructions And Safety

Hide thumbs
Table of Contents

Advertisement

Quick Links

EN
USER INSTRUCTIONS AND SAFETY
Congratulations on your purchase of an N-Com product.
N-Com B902L was made using the most advanced technology and top-quality materials.
Long-running tests and thorough system development have made it possible to achieve
the highest audio quality.
For additional information on the B902L, to download the instructions in PDF format and
install the latest available Firmware version, please visit the website www.n-com.it.
Firmware version: 1.0
REFERENCE STANDARDS
The products of the N-Com line comply with standards as per the table below:
B902L
Battery
charger
Battery
The Declarations of Compliance can be downloaded from the website www.n-com.it (Download section).
Model: B902L R
PMN: N-Com B902L R
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.; any
use of such marks by N-Com is under license. Other trademarks and trade names are those of their
respective owners.
The Bluetooth system complies with the main safety requirements and
other applicable provisions of Directive RED 2014/53/EU, 2009/65/EC,
2012/19/EU WEEE
Directive 2014/35/EU LVD, 2014/30/EU EMC, 2009/125/CE ErP,
2011/65/EU RoHS
Directive 2001/95/CE – GPSD, 2013/56/UE - BAT, 1907/2006 – REACH,
2014/30/UE – EMC, 2011/65/EU - RoHS
FCC ID:
Y6MNCOM15
IC: 9455A-NCOM15
R-NZ
Fw 1.0 - 27/01/2021

Advertisement

Table of Contents
loading

Related Manuals for N-Com B902L

Summary of Contents for N-Com B902L

  • Page 1 R-NZ The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.; any use of such marks by N-Com is under license. Other trademarks and trade names are those of their respective owners. Fw 1.0 - 27/01/2021...

  • Page 2: Table Of Contents

    1.7.Disposal........................................5 CONTENT OF THE PACKAGING ..............................6 INSTALLATION ON THE HELMET .............................7 3.1.Installing the B902L system on the helmet ..........................8 3.2.Applying the ESS system to the helmet ........................... 12 3.3.Adjusting the microphone ................................14 3.4.Removing the B902L system from the helmet ........................15 BASIC FUNCTIONS ...................................

  • Page 3: Warnings And Safety

    • When using the N-Com system, comply with all limitations and instructions related to the use of cell phones. • Do not turn on your cell phone or the N-Com system whenever their use is forbidden or when these devices can cause interference or dangerous situations.

  • Page 4: Interferences

    Use the device only in the normal position, as described in the product documentation. Do not attempt to disassemble, tamper with, or modify any part of the N-Com system. Caution: Adjust the volume of the N-Com system and of the audio sources connected to it before you use the system on the road.

  • Page 5: Disposal

    1.7. Disposal Refer to this user manual and to manuals related to other parts of the N-Com system in order to disassemble the system from the helmet. Once the system has been disassembled, dispose of it according to the following instructions: •...

  • Page 6: Content Of The Packaging

    CONTENT OF THE PACKAGING The N-Com B902L package contains: N-Com B902L system Mini USB wire Battery charger Keypad adapters for N87, N100-5 Microphone with clip Helmet adapters Helmet adapter double-sided adhesive tape Adhesive strips for loudspeakers Microphone foam...

  • Page 7: Installation On The Helmet

    • Before you install the B902L system on the helmet, make sure it turns on properly. Press the “ON” key for about 2 seconds, until the blue LED on the key pad lights up and you hear a beep in the headset.

  • Page 8: Installing The B902L System On The Helmet

    3.1. Installing the B902L system on the helmet • Hook up the microphone connector to the other end, following the directions of the arrows (Fig. 2). N.B.: You can adjust the position of the microphone. For instructions on how to do this, please see chapter.
  • Page 9 Insert the microphone into the eyelet (Fig. 8) and position it in the special housing, then inserting the metal boom in the groove found in the chin guard coupling frame (Fig. 9). Caution: make sure that the side of the microphone support with the writing “N-Com” is facing inward.
  • Page 10 Fig. 11 ONLY FOR HELMET N100-5 – positioning of wiring and microphone Positioning the left side wiring: • Lift up the plastic lining of the cheek padding (Fig. 12). • Fix the cable inside the helmet and make sure the left fixing clip snaps into its housing (Fig. 13). •...
  • Page 11 • Fix the cable inside the helmet and make sure the left fixing clip snaps into its housing (Fig. 17). • Open the rubber cap of the B902L system. • Reassemble the gasket and secure it with the specific screw.

  • Page 12: Applying The Ess System To The Helmet

    3.2. Applying the ESS system to the helmet • Choose the specific adapter for your helmet. There is a letter on the adapter that corresponds to the compatible helmet model, as indicated in the table below: LETTER ON THE ADAPTER COMPATIBLE HELMETS N100-5/PLUS, N90-3, N87/PLUS, N70-2 GT/X N40-5 GT/-5, N40/FULL...
  • Page 13 N90-3 HELMET • After having repositioned the shell edge gasket, peel off sections 1 and 2 of the film of the double-sided adhesive tape. N.B.: It is recommended to cut off the piece of remaining film so that it is not visible once the adapter is applied to the helmet shell. •...

  • Page 14: Adjusting The Microphone

    • Remove the protective film from the ESS system. 3.3. Adjusting the microphone The B902L system makes it possible to adjust the position of the microphone in order to facilitate its positioning in the different helmet models. Proceed as follows: •...

  • Page 15: Removing The B902L System From The Helmet

    3.4. Removing the B902L system from the helmet Proceed as follows to remove the B902L system from the helmet: • Push the ESS light upward to release it from the adapter and have free access to the shell edge gasket (Fig. 36).

  • Page 16: Basic Functions

    Press “ON” and keep it pressed for about 6 seconds, until the LEDs turn System OFF off and you hear the voice announcement. N.B.: during the switch on/switch off phase of the B902L system, the ESS light flashes for a few seconds. 4.1.

  • Page 17: N-Com Easyset

    Click on "DOWNLOAD" and save the file in the computer. • Click on "UPDATE" and wait for the firmware update to end. The release notes of the last Firmware version can be found on the website www.n-com.it – in the “Support”/”Download”/”Software” section. PAIRING UP MENU All the Bluetooth pairing up operations are carried out in this mode.

  • Page 18: Configuration Menu

    CONFIGURATION MENU All the settings of the N-Com system are carried out in this mode. To access the Configuration Menu starting with the N-Com switched on, press the keys “” and “” for 4 seconds. Once in the “Configuration” menu, press the keys“” and “” to scroll through the various menu items.

  • Page 19: Mobile Phone / Mp3 Player Pair Up

    • Activate the search of Bluetooth devices on the mobile phone. • Select the N-Com system from the list. If a password is requested, enter the code 0000 (four zeros). • After a few seconds, the connection between the two devices is activated.

  • Page 20: Mobile Phone

    MOBILE PHONE To pair up a mobile phone to the B902L system, follow the procedure illustrated in Chapter 7. Answering a phone call Briefly press any key when you hear the incoming call signal. When you hear the ringtone, say any word out loud.

  • Page 21: Conference Call Function

    9.2. Conference call function When a call comes in on a mobile phone connected via Bluetooth to B902L, the intercom is temporarily turned off. However, if you wish to share the phone call with the other helmet, simply turn on the intercom manually during the phone call.

  • Page 22: Music Via Bluetooth

    10. MUSIC VIA BLUETOOTH To pair up an Mp3 device to the B902L system, follow the procedure illustrated in Chapter 7. Play music (Play) Briefly press “ON”. When the player is connected and playing music, briefly press Pause function (Pause) “ON”.

  • Page 23: Navigator Pair Up

    • Activate the search of Bluetooth devices on the navigator. • Select the N-Com system from the list. If a password is requested, enter the code 0000 (four zeros). • After a few seconds, the connection between the two devices is activated.

  • Page 24: Audio Multitasking

    It can be enabled / disabled through the Configuration Menu (chapter 6), the N-Com EASYSET program or the N-Com EASYSET APP. Once the function has been enabled / disabled, the N-Com system needs to be switched off and then switched on in order to store the selection.

  • Page 25: Led Signalling Lights

    15.1. Emergency Stop Signal ESS (mode 1) The B902L system is equipped with a LED system to assist emergency braking. In case of sudden braking, the LEDs on the B902L flash for a few seconds. The braking level can be adjusted using the “N-Com EASYSET” programme or through the “N-Com EASYSET App”...

  • Page 26: Intercom

    “ Pairing up Menu ”. • Put the N-Com system in “Setting” mode: press the “ON” key and keep it pressed for 4 seconds, until the blue LED starts to flash quickly. • Pairing up other N-Com On B902 system, press the key “”...

  • Page 27: Intercom Function (One-To-One Connection)

    N.B.: In case the Intercom connection system falls outside the range (Intercom connection interrupted), the B902L system will automatically try to reconnect every 8 seconds. Double beeps will be emitted until the Intercom connection is not restored.

  • Page 28: Smart Conference (Group Intercom)

    The temporary disabling of the VOX function is then removed the first time the N-Com device is turned off; so, if the VOX Intercom is enabled (from PC or APP), it will be restored the next time the device is switched on.

  • Page 29: Universal Intercom" Intercom

    UNIVERSAL INTERCOM function 17.1. Pairing up the UNIVERSAL INTERCOM The N-Com system can be paired up to the other intercom (from now on referred to as Intercom B) as if it was a mobile phone. • Make sure the B902 is turned off.

  • Page 30: Universal Conference (Chain Intercom)

    Universal Conference (chain intercom) The “Universal Conference” mode can be used to connect in conference call N-Com systems of the “900” series and one system paired up in Universal Intercom mode. The connection procedure is outlined in the diagram provided here below: System A must have been paired up beforehand to two B systems (Universal Intercom pair up) and C.

  • Page 31: Remote Control

    18. REMOTE CONTROL The B902L device can be controlled by using a remote control (sold separately), so that you do not have to take your hands off the handlebars to use the keypad. The N-Com system is compatible with the RC4 Remote Control by SENA.

  • Page 32: Battery And Recharge

    N.B.: In case you are not planning on using the N-Com system for a long time, you need to fully recharge the device before storing it away. N.B.: In case the device is not used for a long time, carry out a complete recharging cycle of the device at least once every 6 months to avoid possible damage to the battery.

  • Page 33: Summary Table Of Controls

    Turning off the Radio Automatic search for new station 2 sec Change station 2 sec (pre-set stations) Pre-set station 4 sec *Press any key on the N-Com keypad. **Press the keys at the same time. ***Starting with the system switched off.

  • Page 34: Warranty

    • Neglect and normal wear and tear of internal and external parts. • Any damage resulting from an accident. • Any modification or tampering made to the helmet or to the N-Com system by the user or third parties. • Use of incompatible accessories not approved by Nolangroup for the purchased N-Com device model.

  • Page 35: Product Identification

    21.4. Product identification N-Com products are identified by means of a code that allows their traceability and identification. The identification code can be found on the adhesive label affixed to the...

  • Page 36: Validity Of N-Com Warranty

    21.5. Validity of N-Com warranty VALIDITY VALIDITY VALIDITY VALIDITY NATION NATION 2 YEARS 1 YEAR 2 YEARS 1 YEAR ALBANIA LEBANON ALGERIA MACEDONIA SAUDI ARABIA MALAYSIA ARGENTINA MALTA AUSTRALIA MOROCCO AUSTRIA MAURITIUS BAHRAIN MEXICO BELGIUM BRP MONTENEGRO BERMUDA NORWAY BOLIVIA...

This manual is also suitable for:

B902

Table of Contents