1. Manuals
  2. Brands
  3. N-Com Manuals
  4. Cell Phone
  5. B901
  6. User instructions

N-Com B901 User Instructions

Hide thumbs Also See for B901:
Table of Contents

Advertisement

Quick Links

EN
USER INSTRUCTIONS AND SAFETY
Congratulations on your purchase of an N-Com product.
N-Com B901 was made using the most advanced technologies and the best materials.
Long-running tests and thorough system development have allowed the highest audio
quality to be achieved.
For additional information about B901, and to download high-definition instructions as
well as the latest Firmware version, visit the website www.n-com.it
Firmware Version: 1.1
REFERENCE STANDARDS
The products of the N-Com line are in compliance with standards as per the table below:
B901
Battery
charger
Battery
The Declarations of Compliance can be downloaded from the website www.n-com.it (Download
section).
FCC ID: Y6MNCOM16
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth
SIG, Inc. and any use of such marks by N-Com is under license. Other trademarks and
trade names are those of their respective owners.
The Bluetooth system complies with the main safety requirements and
other applicable provisions of Directive 99/5/CE, Directive 2009/65/EC,
Directive 2011/65/CE, Directive 2012/19/EU
Directive 2006/95, 2004/108, 2009/65/EC, 2011/65/CE, 2012/19/EU,
2009/125/CE
Directive 2006/66/CE
IC: 9455A-NCOM16
R-NZ
B901 "K" - Fw 1.1x-1 - 05/10/2017

Advertisement

Table of Contents
loading

Related Manuals for N-Com B901

Summary of Contents for N-Com B901

  • Page 1 Firmware version, visit the website www.n-com.it Firmware Version: 1.1 REFERENCE STANDARDS The products of the N-Com line are in compliance with standards as per the table below: The Bluetooth system complies with the main safety requirements and B901...

  • Page 3: Table Of Contents

    SATELLITE NAVIGATOR FOR MOTORCYCLES ................... 20 FM RADIO ............................. 20 INTERCOM ............................21 13.1.N-Com “900” Series Intercom pairing up ..........................21 13.2.Pairing up other N-Com intercoms ............................21 13.3.Intercom function (one-to-one connection) ........................22 13.4. Smart Conference (Group Intercom) ............................23 “UNIVERSAL INTERCOM”...

  • Page 4: Warnings And Safety

    When using the N-Com system, comply with all limitations and instructions related to the use of cell phones. Do not turn on your cell phone or the N-Com system whenever their use is forbidden or when the devices can ...

  • Page 5: Qualified Personnel

    1.7. Disposal Refer to this user manual and to manuals related to other parts of the N-Com system in order to disassemble the system from the helmet. Once the system has been disassembled, dispose of it according to the following...

  • Page 6: Content Of The Packaging

    CONTENT OF THE PACKAGING The N-Com B901 package contains: e-box Adesive Keypad Rechargeable Battery charger Mini USB jack wire battery Microphone Microphone Adhesive strips foam for cable Key, Screw, Microphone Microphone securing Adhesive strips for securing clip stickers loudspeakers...

  • Page 7: Installation On The Helmet

    INSTALLATION ON THE HELMET Important: Prior to installing the N-Com system, it is recommended to write down the identification code affixed to the product (see chapter 18.5). You can download the installation video from www.n-com.it Download section. 3.1. Preliminary operations – Jet helmets or Flip-up helmets ...
  • Page 8 Fig. 4 Fig. 5 Fig. 6a Fig. 6b Fig. 7 ONLY FOR X701 – X603 - X602 HELMETS:  Take the polystyrene cheek pads that have just been removed and, using a pair of scissors, remove the round insert by cutting the fabric securing points.

  • Page 9: Installing The Microphone - Jet Helmets Or Flip-Up Helmets

    3.3. Installing the microphone – jet helmets or flip-up helmets  Set up the microphone by inserting the clip that holds it in place, being careful to position it correctly. (Fig. 11) Note: The flat part of the clip has to face upward when the microphone is positioned as shown in Fig. Fig.

  • Page 10: Installing The Battery And The Right-Hand Side Speaker

    3.5. Installing the battery and the right-hand side speaker  Connect the battery to the wiring system. (Fig. 16)  Position the battery in the right polystyrene cheek pad housing and secure it using the Velcro ribbon. (Fig. 17 / 18) Fig.

  • Page 11: Positioning The E-Box

    ONLY FOR X702 HELMET:  Position the battery connector and wiring underneath the shell gasket (Fig. 21).  Cut along the pre-cut lines of the plastic tab on the back of the comfort padding (Fig. 22).  Secure the wiring underneath the plastic tab. Close the cut parts using the cable fixing adhesives (Fig.

  • Page 12: Installing The Adhesive Keyboard

    N.B.: BEFORE replacing the left polystyrene cheek pad, follow the instructions provided in the following chapter. 3.7. Installing the adhesive keyboard  Remove the N-Com plug from the left side of helmet; make this easier, recommended to push the plug from the inside of the helmet.
  • Page 13  Remove the protective film from the back of the adhesive keyboard using the special tab. (Fig. 32)  Pass the antenna and keypad cable completely through, inside the helmet. Fig. 32  Apply the keyboard to the shell and press down on its entire surface to make sure that it sticks properly.

  • Page 14: Removing The System

    Warning: Always verify the proper length of your chinstrap and adjust it if necessary, referring to the specific helmet instructions. Warning: After the B901 is installed on the helmet, make sure the microphone is properly positioned in front of your mouth, if necessary adjusting the moveable element.

  • Page 15: Basic Functions

    4.2. Auto On / Off function If the helmet does no move for more than 60 seconds, the B901 system goes into “deep sleep” mode. The system is completely turned on as soon as movement is detected. If the system is in “deep sleep” mode for more than 3 days, it turns off completely. To turn it back on, the “ON”...

  • Page 16: Configuration Menu

    CONFIGURATION MENU All Bluetooth pair ups and other adjustments are carried out in this mode. To put the system in “Configuration mode” (starting from a switched off system) press the “ON” key and keep it pressed for 4 seconds, until you hear the voice announcement “ Configuration ”. Once in the “Configuration”...

  • Page 17: Pairing Up With Mobile Phones Or Other Bluetooth Devices

    Bluetooth device or by pressing “ON” and keep it pressed for about 2 seconds. MOBILE PHONE To pair up a mobile phone to the B901 system, follow the procedure illustrated in Chapter 6. Answering a phone call Briefly press any key when you hear the incoming call signal.

  • Page 18: Conference Call Function

    7.2. Conference call function When a call comes in on a mobile phone connected via Bluetooth to B901, the intercom is temporarily turned off. However, if you wish to share the phone call with the other helmet, simply turn on the intercom manually during the phone call.

  • Page 19: Managing Two Mobile Phones (Or Bluetooth Devices)

    MANAGING TWO MOBILE PHONES (OR BLUETOOTH DEVICES) The B901 system can be hooked up to two phones (or Bluetooth) devices at the same time. The second phone (secondary device) can receive calls but not make them. To pair up the second Bluetooth phone (secondary device): Make sure the B901 is turned off;...

  • Page 20: Satellite Navigator For Motorcycles

    To pair up a satellite navigator to the B901 system, follow the procedure illustrated in Chapter 6. N.B.: Intercom connection is automatically cut off every time the navigator gives directions and restored at the end of the message from the navigator.

  • Page 21: Intercom

    Com systems with N-Com systems OTHER THAN the “900” series  Make sure the systems are turned off; Put the N-Com system in “Setting” mode: press the “ON” key and keep it pressed for 4  seconds, until the blue LED starts to flash quickly;...

  • Page 22: Intercom Function (One-To-One Connection)

    If you do not want automatic reconnection, press the “ON” key to stop the automatic reconnection attempts. The B901 system is equipped with the VOX function, which makes it possible to switch the intercom on and off vocally. In order to work properly, the VOX function must be enabled on both B901 systems connected via intercom.

  • Page 23: Smart Conference (Group Intercom)

    The temporary disabling of the VOX function is then removed the first time the N-Com device is turned off; so, if the VOX is enabled (from PC or APP), it will be restored the next time the device is switched on.

  • Page 24: Universal Intercom" Intercom

    UNIVERSAL INTERCOM function. 14.1. Pairing up the UNIVERSAL INTERCOM The N-Com system can be paired up to the other intercom (from now on referred to as Intercom B) as if it was a mobile phone. Make sure the B901 is turned off;...

  • Page 25: Universal Conference (Chain Intercom)

    14.3. Universal Conference (chain intercom) The “Universal Conference” mode can be used to connect in conference call N-Com systems of the “900” series and one system paired up in Universal Intercom mode. The connection procedure is outlined in the diagram provided here below: System A must have been paired up beforehand to two B systems (Universal Intercom pair up) and C.

  • Page 26: Remote Control

    C. Press the relative connection command to start a 4-participant intercom conference call. Note: The “ Universal Conference ” mode can also be used by connecting only “900” series N-Com systems”. Note: The “ Universal Conference ” mode can also be used by connecting “900” series N-Com systems with other N- Com devices (B5, B1.4, etc.)

  • Page 27: Battery And Recharge

    When the battery is charged, the blue LED goes back to its standard flashing. In case you don’t plan to use the N-Com system for a long time, you need to fully recharge the device before storing it away.

  • Page 28: Summary Table Of Controls

    B901 17. SUMMARY TABLE OF CONTROLS    Button  Turning on 2 sec Turning off 6 sec Increase Volume Decrease Volume Answer phone call* Voice call 2 sec Speed Dialling Menu** Hang up/reject a phone call 2 sec...
  • Page 29 Group intercom disconnection Turning on the Radio Turning off the Radio Automatic search for new 2 sec station Change station 2 sec (pre-set stations) Pre-set station 4 sec *Press any key on the N-Com keypad. **Press the keys at the same time.

  • Page 30: Limited Warranty

     Any damage caused by an accident;  Any change or modification made to the helmet or to the N-Com system by the user or by third parties.  Colour changes or damages caused by exposure to harmful chemical products.

  • Page 31: Validity Of This Limited Warranty

    18.5. Product identification N-Com products are identified by means of a code that allows product traceability and identification. The identification code is listed on the adhesive label applied to the B901 system and on the outside of the sales package.

  • Page 32: Warranty Registration Form

    19. WARRANTY REGISTRATION FORM Product name B901 Identification code Buyer’s Information Name Last name Address Phone e-mail Dealer’s stamp Date of purchase...

Table of Contents