N-Com B901 Quick Start Manual

N-COM B901 & KTM 1290 SUPER ADVENTURE S, R, SUPER DUKE GT
KTM: 1290 SUPER ADVENTURE S, 1290 SUPER ADVENTURE R, 1290 SUPER DUKE GT (2019)
N-Com: B901 system, firmware version 1.4
The N-Com B901 is compatible with the new Bluetooth audio system installed on the KTM. After having paired up and
connected the N-Com system to your motorbike, you will be able to hear all audio signals coming from the KTM in the
helmet.
INDIVIDUAL USE
Make sure that:
- the motorbike is stopped;
- the KTM MY RIDE system is active;
- the Wireless Interface function is active
1. Press the keys "UP" or "DOWN" to select the item "SETUP", then press the key "SET" to confirm the choice.
2. Press the keys "UP" or "DOWN" to select the item "BLUETOOTH", then press the key "SET" to confirm the choice.
3. Press the keys "UP" or "DOWN" to select the item "RIDER HEADSET", then press the key "SET" to confirm the choice.
4. Press once again the key "SET" to confirm the choice.
5. Bring the N-Com system to the "Configuration" menu and select the item "Mobile pairing" (please refer to the N-
Com user manual).
6. The N-Com device is detected after a few seconds. Select it from the list by pressing the key "SET". Press the key
"SET" once again to confirm the choice.
7. The systems are now paired up. From now on, all audio coming from the motorbike is transmitted to the helmet.
The pairing up is saved by both the helmet and the motorbike, and it is not lost upon turning them off. That is, after
turning on the KTM and the N-Com system, the two will connect automatically.
MOBILE PHONE CONNECTION
To use your mobile phone while riding, it is advisable to pair it up directly to the audio system of the motorbike (please
refer to the motorbike user manual). By doing so, the calls will be transmitted to the helmet. Incoming calls will be
answered using the KTM controls.
ADJUSTING THE VOLUME
By updating the N-Com system to the last available Firmware version, you can adjust the volume of the audio coming
from the bike directly from the controller located on the handlebars.
While riding, you will be able to turn up or down the volume of the multimedia audio transmitted in the helmet without
having to take your hands off the handlebars.
N.B.: Adjusting the volume DOES NOT affect the audio of phone calls.
BLUETOOTH CONNECTION TO THE AUDIO SYSTEM OF KTM
1