Table of Contents
Advertisement
Parts and Their Functions
Front panel
9 Cursor buttons [ # , 2 , ! , 1 , SET, CANCEL]
[ # ] button:
Becomes effective when the 3 mark is shown on
the display panel.
Forwarding of CLIP, etc., character selection and
separate function menu are displayed.
[ 2 ] button:
Becomes effective when the 4 mark is shown on
the display panel.
Forwarding of CLIP, etc, character selection and
separate function menu are displayed.
[ ! ] button:
Becomes effective when the 2 mark is shown on
the display panel or the cursor (_) is present.
Moves the cursor one space to the left.
[ 1 ] button:
Becomes effective when the 1 mark is shown on
the display panel or the cursor is present. Moves
the cursor one space to the right.
[SET] button:
Becomes effective when "SET or CANCEL" is
shown on the display panel. Pressing the SET
button establishes selection or setting and
designated operations take place.
[CANCEL] button:
Becomes effective when "SET or CANCEL" is
shown on the display panel. Pressing the
CANCEL button erases selection or setting, and
the previous screen is restored without anything
taking place.
: Channel buttons [CH1 CH4]
Designates the channel shown on the display
panel. The button of the selected channel lights and
the selected channel status is shown on the
display.
Channel 1 is selected for power supply start up.
Unit internal settings, HDD status, error status and
other conditions for which no channel is designated
can be viewed on the display irrespective of the
channel selected.
; Handle
Combining the CANCEL button with
function buttons
Targeted operation takes place by pressing the
function button while keeping the CANCEL button
depressed.
Effective only on main menu.
Processes other than LOCAL/REMOTE changeover
are effective only in local mode.
[CANCEL]+[F1] (RECUE):
Re-cues clip currently being loaded.
[CANCEL]+[F2] (EMR PLAY):
Executes emergency playback.
When the EMR-OUT1 clip is present, it is loaded
and playback occurs repeatedly. When that clip is
absent, playback of the clip currently being loaded
begins from the current stop position, and after
playback to the end position, return is made to the
clip head position and playback is repeated.
[CANCEL]+[F3] (REMOTE/LOCAL):
Switches the channel currently shown on the
display between remote mode and local mode.
Switch is made between REMOTE and LOCAL
each time [CANCEL] + [F3] is pressed.
REMOTE:
The unit is controlled from an external controller.
Operations cannot be performed with the front
panel.
LOCAL:
The unit is controlled from the front panel.
Operations cannot be performed with the
external controller.
[CANCEL]+[F4] (TC/CTL):
Displays the time code mode. Each time the button
is pressed, switching occurs as follows:
TC 5 CTL1 5 CTL2 5 TC.
[CANCEL]+[F5] (CTL RESET):
When the [CANCEL] + [F5] button is pressed at
CTL1, the time code is reset to 00:00:00:00.
9
Advertisement
Table of Contents
