Table of Contents
Advertisement
Connector Signals
$ Analog I/O board
VIDEO IN:
BNCa2, loop-through with 75-ohm termination
switch
(This board does not support non-standard
signals.)
VIDEO OUT:
BNCa1
(The EE output is not locked to the REF input.)
AUDIO IN (ANALOG):
XLRa2, CH1/CH2
AUDIO OUT (ANALOG):
XLRa2, CH1/CH2
$ Analog out board
VIDEO OUT:
BNCa1
AUDIO OUT (ANALOG):
XLRa2, CH1/CH2
$ SDTI I/O board
SDTI IN:
BNCa2, with buffer out
Complies with SMPTE305M standard
SDTI OUT:
BNCa1
Complies with SMPTE305M standard
(The EE output is not locked to the REF input.)
Data stream format:
Complies with the SMPTE321M standard
$ SDI I/O board (+ analog out board)
SDI IN:
BNCa2, with buffer out
Complies with SMPTE259M-C and 272M
standard
SDI OUT:
BNCa1
Complies with SMPTE259M-C and 272M
standard
(The EE output is not locked to the REF input.)
VIDEO OUT (ANALOG):
BNCa1
(The EE output is not locked to the REF input.)
AUDIO OUT (ANALOG):
XLRa2, CH1/CH2
39
Advertisement
Table of Contents
