Table of Contents
Advertisement
Display Panel
$ CLIP Load Screen
Shows the CLIP in storage.
1
2
3
5
6
7
1 File number display
Displays the number of registered CLIPS and the
order of CLIPS to be displayed.
2 Channel display
Displays the channel number to be loaded.
3 CLIP name display
Displays the CLIP name.
4 Recording format display
Displays the recording format of the CLIP
displayed.
5 [F1] LOAD
When the [F1] button is pressed, the CLIP on
display is loaded into the current display channel
and simplified manual operation menu pattern 1 is
restored.
6 [F2] NEW
Press the [F2] button to create a new CLIP.
When the [F2] button is pressed, the CLIP creation
screen is called up.
7 [F3] DETAIL
When the [F3] button is pressed, information on the
CLIP displayed is shown for two seconds.
The following three types of information are
displayed.
Start time code
Material duration
Recording format
8 [F5] BACK
Press the [F5] button to return to simplified manual
operation screen pattern 1.
9 Previous CLIP display
Shows that there is a CLIP to display.
When cursor button [ # ] is pressed, the previous
CLIP is displayed.
: Next CLIP display
Shows that there is a CLIP to display.
When cursor button [ 2 ] is pressed, the next CLIP is
displayed.
$ CLIP Creation Menu
Creates a new CLIP.
4
9
3 3
4 4
8
:
1 CLIP name display
The new CLIP name is shown.
With cursor button [ ! ] [ 1 ], select the characters to
be changed; change the characters with cursor
button [ # ] [ 2 ]. Characters are shown in the
sequence: A ~ Z, a ~ z, 0 ~ 9, -, $, %.
Up to 8 characters can be input.
2 [F3] DEL
When the [F3] button is pressed while inputting
characters, the character at the cursor position is
deleted, and subsequent characters fill in the gap.
When the [SET] button is pressed, the created CLIP is
loaded into the current display channel and simplified
manual operation screen pattern 1 is restored.
Press the [CANCEL] button to return to simplified
manual operation screen pattern 1.
28
1
2
3 3
4 4
Advertisement
Table of Contents
