Table of Contents
Advertisement
GS1-128 On/Off
GS1-128 Message Length
Scan the bar codes below to change the message length. Refer to
Description
= 1-80. Minimum Default = 1, Maximum Default = 80.
Minimum Message Length
GS1-128 Redundancy
If you are encountering errors when reading GS1-128 bar codes, you may want to
adjust the redundancy count. Redundancy adjusts the number of times a bar code
is decoded before transmission, which may reduce the number of errors. Note that
the higher the redundancy count, the longer it will take to decode the bar code. To
adjust the redundancy, scan the GS1-128 Redundancy bar code below, then scan a
redundancy count between 0 and 10 on the
Save bar code. Default = 0.
Telepen
<Default All Telepen Settings>
102
* On
(page 80) for additional information. Minimum and Maximum lengths
Programming
GS1-128 Redundancy
HF52X Fix Mount Barcode Scanner User Guide
Off
Message Length
Maximum Message Length
Chart. Then scan the
Advertisement
Table of Contents
