Installation and Configuration (Windows 95/98/Me)
button
Spool Settings...
Specify the method of sending (spooling) documents from the program to the printer.
Spool Data Type
Select spool data type (EMF format or RAW format). Specifying RAW format results in longer time before
placing an application operational after printing on the application.
Note: Spooling by EMF format (metafile compression) may cause the following problems on some
application software.
1) Printing result is different from the screen display.
2) Printing requires excessive time.
Enable bidirectional support
Be sure to check the check box of "Enable bidirectional support" when installing the status monitor.
Printing may be disabled without the checking it.
button
Port Settings...
Modifies printer port settings.
19