Panasonic WORKIO DP-2000 Operating Instructions Manual page 77

I Handling Tab
Sorter
Select whether to Stack, Sort, Rotate-Sort or Shift-Sort when printing multiple copies.
Note: When the Staple is set to On, the Rotate-Sort and Shift-Sort is not activated even if it is selected.
Printing on both sides (Duplex)
Select duplex printing for printing on both sides.
Note 1) Duplex Printing is allowed only when the Dual-Path Exit Guide Unit, Paper Transport Unit and
Automatic Duplex Unit (DA-FK200/FK210/MD200) are installed.
Note 2) Check [Duplex Printing] check box in Device Options Tab.
Flipping Direction
Select binding side (Long Edge/Short Edge) for duplex printing.
Binding Margin
Select the binding margin upon duplex printing.
The width of binding margin is specified on the main unit.
Instructions)
Output Tray
Specify the output destination. (Auto Selection, Inner Tray 1, Inner Tray 2)
Note 1) Output Tray selection is allowed only with Dual-Path Exit Guide Unit, Paper Transport Unit, Exit
Tray (Outer) or 1-Bin Finisher (DA-FK200/FK210/XT200/FS200) installed.
Note 2) Check the [Inner Tray], [Outer Tray] or [Finisher] check boxes in the Device Options Tab.
Installation and Configuration (Windows 2000)
(See page 38 of the Copier Operating
77