13
14
15
16
Installation and Configuration (Windows 95/98/Me)
Select the Details tab and click on the
button.
The Add Port dialog box appears. Click the Other
radio button, and select HLPRMON from "Click the
type of port you want to add:" and click on the
button.
OK
The LPR Port Name dialog box appears.
Type the IP Address of the DP-2500 and "lp"as the
queue name separated by a ":"
Example: 192.168.3.23:lp
Click on the
OK
because the queue name was already used for the
same IP Address, select a unique name such as "lpr".
The screen reverts to DP-2500 PCL Properties.
Check that the "Print to the following port:"was
changed as entered, and click on the Apply button
first and then on the
Add port...
button. If an error occurs
button.
OK
15