Case Clearance - Hussmann REACH-IN Installation & Operation Manual

CASE CLEARANCE

A 4-inch (102 mm) space between the rear of the merchandiser and
wall must be maintained for air circulation. However, in high ambient
conditions, sweating may still occur. If this happens install a method of
forced ventilation such as a fan ventilation kit.
ATTENTION
• Merchandiser must operate for 24 hours before
loading product!
• Regularly check merchandiser temperatures.
• Do not break the cold chain. Keep products in freezer
before loading into merchandiser.
• Medium temperature merchandisers are designed for
loading ONLY pre-chilled products.
• Low temperature merchandisers are designed for
loading ONLY frozen products.
» Excessive ambient conditions may cause condensation and therefore sweating of doors. Facility operators should
monitor doors and floor conditions to ensure safety of persons.
» Case ventilation openings must be clear of any obstructions. Do not damage the refrigerant circuit.
» Always disconnect the electrical power at the main disconnect when servicing or replacing any electrical component.
This includes, but is not limited to, such items as fans, heaters, thermostats and lights.
» Do not use mechanical devices or other means to accelerate the defrosting process.
» Do not use electrical appliances inside the food storage compartments of the case(s).
» Do not store items or flammable materials atop the unit. Do not walk on case.
HUSSMANN CORPORATION • U.S. & CANADA 1-800-922-1919 • BRIDGETON, MO 63044-2483 • MEXICO 1-800-890-2900 • WWW.HUSSMANN.COM • PN 3110586_C
Providing Information About Safety Messages in Collateral Materials and Product
INSTALLATION TOOL LIST
Unloading From Trailer:
Lever Bar (also known as a Mule, Johnson Bar, J-bar,
A1 Explanation of Signal Words and Symbols
Lever Dolly, and pry lever)
Moving Dolly
Signal words and safety symbols that are used in a product's collateral materials or on the product may
be defined in collateral materials if space is available.
Setting Case Line-Up:
A1.1 Safety Alert Symbol
Level, 4 ft suggested
The meaning of the safety alert symbol may be provided in collateral materials. The following artwork may
Ratchet
be used for this purpose.
1/4 in. Socket
5/16 in. Socket
1/2 in. Socket
This is the safety alert symbol. It is used to alert you
Battery Drill/Screw Gun
to potential physical injury hazards. Obey all safety
Caulking Gun messages that follow this symbol to avoid possible
injury or death.
10 in. Adjustable Crescent Wrench
A1.2 Signal Words
The meaning of the different signal words as defined by the ANSI Z535.6 and ANSI Z535.4 standards
»
Do NOT remove shipping crate until
may be explained in collateral materials. The following artwork may be used for this purpose.
the merchandiser is positioned for
installation.
Copyright National Electrical Manufacturers Association
Provided by IHS Markit under license with NEMA
No reproduction or networking permitted without license from IHS
A1.3 Other Highlighting Conventions
The meaning of any other highlighting conventions used to differentiate safety messages (e.g., text
manipulations, indention, etc.) may be explained in collateral materials.
A1.4 Safety Symbols
The meaning of any safety symbols used on safety labels or collateral materials may be explained in
collateral materials.
Iv
© 2017 National Electrical Manufacturers Association
Signal words and safety symbols that are used in a product's collateral materials or on the product may
be defined in collateral materials if space is available.
Safety Signs and Labels
(Informative)
A1.1 Safety Alert Symbol
The meaning of the safety alert symbol may be provided in collateral materials. The following artwork ma
be used for this purpose.
This is the safety alert symbol. It is used to alert you
to potential physical injury hazards. Obey all safety
messages that follow this symbol to avoid possible
injury or death.
A1.2 Signal Words
The meaning of the different signal words as defined by the ANSI Z535.6 and ANSI Z535.4 standards
may be explained in collateral materials. The following artwork may be used for this purpose.
DANGER indicates a hazardous situation which, if not
WARNING indicates a hazardous situation which, if not
CAUTION indicates a hazardous situation which, if not
NOTICE is used to address practices not related to
DANGER indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
Safety instructions (or equivalent) signs indicate specific
WARNING indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
A1.3 Other Highlighting Conventions
The meaning of any other highlighting conventions used to differentiate safety messages (e.g., text
CAUTION indicates a hazardous situation which, if not
manipulations, indention, etc.) may be explained in collateral materials.
avoided, could result in minor or moderate injury.
A1.4 Safety Symbols
The meaning of any safety symbols used on safety labels or collateral materials may be explained in
collateral materials.
NOTICE is used to address practices not related to
physical injury.
© 2017 National Electrical Manufacturers Association
Safety instructions (or equivalent) signs indicate specific
safety-related instructions or procedures.
avoided, will result in death or serious injury.
avoided, could result in death or serious injury.
avoided, could result in minor or moderate injury.
physical injury.
safety-related instructions or procedures.
Licensee=Hussmann Corp/8160899001, User=Trevett, Jason
Not for Resale, 02/16/2021 11:49:55 MST