Table of Contents
Advertisement
Charging the rechargeable battery using the
MCA 800 charging adapter
If you have purchased an optional MCA 800 charging adapter,
you can also charge the stethoset receiver using the charging
adapter.
WARNING
Interference due to magnetic fields!
The MCA 800 charging adapter generates stronger permanent
magnetic fields. These can cause interference with cardiac
pacemakers and implanted defibrillators (ICDs).
b
Always maintain a distance of at least 3.94" (10 cm) between
the holding magnets of the charging adapter and the cardiac
pacemaker or implanted defibrillator.
1
Select a suitable country adapter and slide it onto the
power supply unit until it clicks audibly into place.
2
Connect the connector of the power supply unit to the con-
nection socket of the MCA 800 charging adapter.
3
Plug the power supply unit into the wall socket.
4
Connect the charging adapter to the charging contacts on
the stethoset receiver. The charging adapter is magneti-
cally oriented to the correct position.
The rechargeable battery is being charged. The LED on the
charging adapter lights up red. When the rechargeable bat-
tery is fully charged, the LED lights up green.
1
US
EU
UK
AU
3
4
You can also use the stethoset receiver during charging.
Note, however, that the receiver can get slightly warm
during charging.
If the LED on the charging adapter flashes red and green, a
charging error/battery error has occurred. In this case, dis-
connect the charging adapter from the stethoset receiver.
More information on the rechargeable battery can be found on
page 19.
Using additional functions
2
RS 2000
3 h
100 %
| 21
Advertisement
Table of Contents
