Adding The Toner And Replacing Toner Waste Container ( ) - Panasonic WORKIO DP-135 User Manual

Adding the Toner and Replacing Toner Waste Container ( )

1
2
3
4
2
For optimum copy quality use the recommended Panasonic toner. Store toner in a cool
ATTENTION
dark place. Do not unseal toner before use. Use it as fast as possible after unsealing.
When U13 is displayed the Add Toner Warning Indicator will begin to flash. This message
is to prompt you that the toner bottle is nearly empty (approx. 300-sheets can be printed).
This message will continue to be displayed until the bottle is replaced. When the count-
down counter reaches 0, the copier will stop operating. To clear the message and enable
the copier to operate, replace the empty toner bottle with a new one.
Open the front cover.
Remove the toner waste container by
slowly pulling it towards the left as
illustrated.
Seal the container with the enclosed
cap and dispose of it properly.
Cap
# Turn the empty Toner Bottle
1
Note: To prevent toner spill, ensure that
$ Pull out the empty Toner Bottle.
Note: If the bottle will not pull out from
Problem Solving/U13
counter-clockwise until it stops. The
Arrow mark (Unlocked symbol
visible on the end of the Toner
Bottle is aligned with the Arrow
mark on the machine.
the key is facing upwards
before removing the toner bottle.
the machine, turn the bottle
slightly in either direction to
release the key and try it again.
)
39