Other Features; Energy Saver/Interrupt Mode - Panasonic WORKIO DP-135 User Manual

Other Features

Energy Saver/Interrupt Mode

ENERGY SAVER
INTERRUPT
Energy saver time (15 minutes) and Sleep time (30 minutes) can be changed
NOTE
by the key operator. (See page 28)
Modes
Normal Operation
Energy Saver Mode
Sleep Mode
Interrupt (F1) Key Energy Saver Key
These modes can save power while the copier is
not in use.
Energy Saver Mode
# To enter this mode
Press the Energy Saver key or the copier will
automatically enter the Energy Saver Mode after 15
*
minutes from the last copy. The indicator will flash.
$ To cancel this mode and make copies
Press the Energy Saver key again.
Sleep Mode
# Automatically enters the Sleep Mode after 30
minutes from the last copy. The copier power will
drop and the indicator will light.
$ To make copies, press the Energy Saver key.
Interrupt Mode
This mode can interrupt other copy jobs while
making copies.
# Press the Interrupt (F1) key, the indicator will
light.
$ Make another copy job using the platen glass.
% Press the Interrupt (F1) key again to continue
the original job.
Note: The ADF can not be used with interrupt.
(Use only the Platen)
Power Consumption
Approximately 91 Wh
Approximately 40 Wh
Approximately 1.5 Wh
Warm Up Time
N/A
30 sec. recovery
30 sec. recovery
21