Panasonic WORKIO DP-135 User Manual page 99

Configuring the Printer Driver Settings
Windows NT 4.0 (User)
Handling Tab
1. Sorter
Select whether to Stack or Sort when printing multiple copies.
Note 1) When the Staple is set to On, the Rotate-Sort and Shift-Sort is not activated even if it is
selected.
2) Shift-Sort is not available on DP-1810P/1810F/2010E.
2. Printing on both sides (Duplex) (For DP-2000/2010E/2500/3000)
Select duplex printing for printing on both sides.
Note 1) Duplex Printing is allowed only when the Dual-Path Exit Guide Unit, Paper Transport Unit and
Automatic Duplex Unit (DA-FK200/FK210/MD200) are mounted.
2) Check [Duplex Unit] check box in Device Options Tab.
3. Flipping Direction (For DP-2000/2010E/2500/3000)
Select binding side (Long Edge/Short Edge) for duplex printing.
4. Binding Margin (For DP-2000/2010E/2500/3000)
Select the binding margin upon duplex printing.
The width of the binding margin is specified on the main unit.
5. Output Tray (For DP-2000/2500/3000)
Specify the output destination. (Auto Selection, Inner Tray 1, Inner Tray 2)
Note 1) Output Tray selection is allowed only with Dual-Path Exit Guide Unit, Paper Transport Unit, Exit
Tray (Outer) or 1-Bin Finisher (DA-FK200/FK210/XT200/FS200) is installed.
2) Check [Inner Tray], [Finisher / Outer Tray] check boxes in Device Options Tab.
44