Function Setting For Key Operator - Panasonic WORKIO DP-135 User Manual

Function Setting for Key Operator

Changing the Paper Size
The paper trays are designed to accommodate invoice, letter, letter R, legal and ledger size
paper. To change the paper size, perform the steps shown below.
1
2
Proceed as Follows:
FUNCTION MODE
ENTER NO. OR
# Press the 1 key to select GENERAL
FUNCTIONS.
1:GENERAL FUNCTIONS
PRESS SET TO SELECT
$ Press the SET key.
GENERAL PARAM. (0-9)
ENTER NO. OR
% Press 9 key.
09 KEY OPERATOR MODE
ENTER PASSWORD=-
& Input the Key Operator ID code (3 digit)
and the SET key.
KEY OPR. MODE (00-25)
ENTER NO. OR
Press the Function Key
(1-2)
( Press 00 and 1 or 2 key to select
the PAPER SIZE.
) Press SET to select the paper tray and
press (
size.
Paper size changes are as follows.
Letter
Legal
* Press the SET key to set up the PAPER
+ Press the RESET key, then exit the
Function
00 PAPER SIZE
1:TRAY-1[LTRB]
or ) keys to set the paper
Letter R Invoice R A3 B4
Ledger FLS2 FLS1 A5R
SIZE.
Function mode.
A4
A4R
B5
B5R
31