Direct Transmission
If your machine's memory is full or you wish to send the document immediately, use Direct Transmission.
Manual Number Dialing (Direct Transmission)
To dial the telephone number manually, follow the steps below.
1
2
MEMORY
3
Enter a telephone number from the keypad.
Ex:
5 5 5 1 2 3 4
4
START
Your machine starts to dial the telephone number.
(see Note 1) (see Note 2) (see Note 3)
Note:
1. If you need a special access number to get an outside line, dial it first then press
(represented by a "-") before dialing the full number.
Ex
: 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing, press
TONE
(represented by a "/").
The dialing mode will be changed from Pulse to Tone after dialing the digit "/".
Ex
: 9 PAUSE TONE 5551234
3. To stop the transmission, press
The display shows:
COMMUNICATION STOP?
1:YES 2:NO
Press
1
to stop the transmission. The Communication Journal will not print out regardless of the printout mode
setting of the Communication Journal.
Set document(s) face down.
Make sure that the lamp goes off.
STOP
.
Sending Documents
ENTER STATION(S)
THEN PRESS START 00%
ENTER STATION
PRESS START TO DIAL
5551234
* DIALING *
5551234
PAUSE
4
00%
to enter a pause
51