Basic Transmission Settings; Contrast; Resolution - Panasonic Panafax UF-885 User Manual

You can temporarily change the transmission settings either before or after you place the document on the ADF.
These settings are as follows;

• Contrast

• Resolution

• Halftone
• Stamp
• Communication Journal
After your document has been sent, your machine will automatically return to the preset settings.
Contrast (see Note 1)
Your machine is preset to Normal contrast. If you wish to send a document with lighter contrast, change the
setting to Lighter. If you wish to send a document with darker contrast, change the setting to Darker.
Press to:
CONTRAST
CONTRAST = Normal
Resolution (see Note 2)
Your machine is preset to Standard resolution, which is suitable for most documents.
Use Fine or Super Fine for detailed documents.
Press RESOLUTION
CONTRAST
RESOLUTION = Standard
(see Note 3)
1. To change the preset Contrast position, change the setting of Fax Parameter No. 01. (See page 35)
Note:
2. To change the preset Resolution position, change the setting of Fax Parameter No. 02. (See page 35)
3. If you send a photographic document with Halftone set to Fast or Quality and the Resolution set to Super Fine (406
pels/inch x 391 lines/inch), the reproduction of the received document will be determined by the capability of the
remote station.

Basic Transmission Settings

DARKER
LIGHTER
CONTRAST
CONTRAST = Lighter
to:
S - FINE
FINE
RESOLUTION RESOLUTION
RESOLUTION = Fine
DARKER
LIGHTER
CONTRAST CONTRAST
CONTRAST = Darker
S - FINE
FINE
RESOLUTION
RESOLUTION = Super Fine
DARKER
LIGHTER
S - FINE
FINE
4
41