To Send A Document With Sub-Address - Panasonic Panafax UF-885 User Manual

Sub-addressing

To send a Document with Sub-address

Using One-Touch/ABBR. Number Dialing
The operation is the same as for normal dialing
1
2
Ex:
3
START
The document is stored into memory and your machine
starts to dial the number of the station and sends the
document(s) with Sub-addressing information.
Using Manual Number Dialing
Use FLASH to separate the Telephone number and the Sub-address.
1
2
Enter the telephone number, press
the Sub-address (up to 20 digits).
(Up to 36 digits including telephone number, pauses,
spaces, FLASH and Sub-address)
Ex: Telephone number = 5551234, Sub-address=2762
Enter as:
3
START
The document is stored into memory and your machine
starts to dial the number of the station and sends the
document(s) with Sub-addressing information.
(see Note 1) (see Note 2) (see Note 3)
Note: FLASH
1.
2. Manual Off-Hook or On-Hook Dialing cannot be used with the Sub-addressing Transmission.
3. The Sub-address is not transmitted during Manual Redial Mode.
142
Set document(s) face down.
01
Set document(s) face down.
5 5 5 1 2 3 4
FLASH
2 7 6 2
separates the Sub-address from the Telephone number and is indicated by an "s" in the display.
FLASH then enter
ENTER STATION(S)
THEN PRESS START 00%
<01> (Station name)
5551234s2762
* STORE * NO. 001
PAGES=001 01%
ENTER STATION(S)
THEN PRESS START 00%
TEL. NO.
5551234s2762
* STORE * NO. 001
PAGES=001 01%