Setting Your Logo - Panasonic Panafax UF-885 User Manual

Setting Your LOGO

When you send a document, your LOGO appears on the top of the copy printed out at the other station.
The LOGO helps to identify you to someone who receives your document.
1
FUNCTION
2
1
3
SET
4
Enter your LOGO (max. 25 characters and digits) by using
the Character keys (See page 12).
Ex:
P A N A S O N I C
If you make a mistake, use
beyond the incorrect character, press
enter the new character.
If more than 19 characters are entered, the left side
characters will scroll off the display.
5
SET
(see Note 1)
Note:
1. Your Company Name or your name must be set as your LOGO because it is required by the Telephone Consumer
Act of 1991. (For details, see FCC NOTICE at the end of this User's Guide)
7
repeatedly until display shows;
or
STOP
User Parameters
to move the cursor
then re-
CLEAR
SET MODE (1-6)
ENTER NO. OR
1:USER PARAMETERS?
PRESS SET TO SELECT
LOGO
LOGO
PANASONIC
2
25