Basic Transmission Settings; General Description; Contrast; Resolution - Panasonic UF-6300 Operating Instructions Manual

Basic Transmission Settings

General Description

You can temporarily change the transmission settings either before or after you place the document on the
ADF.
These settings are as follows:

• Contrast

• Resolution

• Stamp
• Communication Journal
After your document(s) have been sent, your machine will automatically return to the preset settings.
Contrast
Your machine is preset to Normal contrast. If you wish to send a document with lighter contrast, change the
setting to Lighter. If you wish to send a document with darker contrast, change the setting to Darker.
Press
Contrast
CONTRAST:
CONTRAST = Normal
Resolution
Your machine is preset to Standard resolution, which is suitable for most documents.
If you want to send it with more detail, change the setting to Fine, Super Fine or Halftone.
Press
Resolution
RESOLUTION:
STANDARD
RESOLUTION = Standard
NOTE
44
to:
NORMAL
to:
RESOLUTION:
HALFTONE(S-FINE)
RESOLUTION = Halftone (S-Fine)
1. To change the preset Contrast position, change the setting of Fax Parameter No. 01. (See
page 36)
2. To change the preset Resolution position, change the setting of Fax Parameter No. 02. (See
page 36)
CONTRAST:
LIGHTER
CONTRAST = Lighter
RESOLUTION:
FINE
RESOLUTION = Fine
CONTRAST:
DARKER
CONTRAST = Darker
RESOLUTION:
RESOLUTION = Super Fine
RESOLUTION:
HALFTONE(FINE)
RESOLUTION = Halftone (Fine)
S-FINE