Broadcast Transmission - Panasonic KX-FPG372 Operating Instructions Manual

Broadcast transmission

This feature is useful for sending the same document to more than one party (up to 20 entries). First
program the entries, then see page 61 for transmission.
Programming entries into the
broadcast memory
{+}{-}
1
Press { { { { MENU} } } } repeatedly until the
following is displayed.
2
Press { { { { # # # # } } } } .
L The number in brackets indicates the
number of registered entries.
3
Press { { { { + + + + } } } } or { { { { - - - - } } } } until the desired entry is
displayed.
Example:
4
Press { { { { SET} } } } .
Example:
L To program other entries, repeat steps
3 and 4 (up to 20 entries).
5
Press { { { { SET} } } } to exit the program.
{STOP}
{MENU} {SET}
DIRECTORY SET
NAVI.=@ BROAD=#
DIR= [00]
NAVI.[+ -] & SET
MIKE
1-987-654-3210
DIR=MIKE [01]
STORE:PRESS SET
REGISTERED
Sending Faxes
Note:
L If you program the wrong entry, press
{ { { { STOP} } } } after step 4 to erase the entry.
L Confirm the stored entries by printing a
broadcast programming list (page 111).
59