Panasonic KX-FPG372 Operating Instructions Manual page 85

To check the transfer greeting message
1. Press { { { { MENU} } } } , { { { { # # # # }{ }{ }{ }{6}{ }{ }{ }{1} } } } .
2. Press { { { { + + + + } } } } or { { { { - - - - } } } } to select "CHECK".
3. Press { { { { SET} } } } .
L The unit will play the message.
4. Press { { { { MENU} } } } .
To erase your own transfer greeting
message
1. Press { { { { MENU} } } } , { { { { # # # # }{ }{ }{ }{6}{ }{ }{ }{1} } } } .
2. Press { { { { + + + + } } } } or { { { { - - - - } } } } to select "ERASE".
3. Press { { { { SET} } } } .
L Your own message will be erased.
4. Press { { { { MENU} } } } .
Note:
L When transferring a call, the pre-recorded
transfer greeting message will be played.
Pager call - when the unit receives a voice
message
This feature allows your unit to call your pager
when your unit receives an incoming voice
message.
1. Press { { { { MENU} } } } .
2. Press { { { { # # # # } } } } , then { { { { 7}{ }{ }{ }{0} } } } .
3. Press { { { { + + + + } } } } or { { { { - - - - } } } } to select "ON".
L If this feature is not required, select
"OFF".
4. Press { { { { SET} } } } .
5. Enter your pager number up to 30 digits.
6. Press { { { { SET} } } } .
7. Enter your pager access code up to 10 digits
if required.
8. Press { { { { SET} } } } .
L The default code 07734 will show "Hello!"
on your pager.
L If you want to change this message, enter
your message up to 30 digits.
PAGER CALL
MODE=OFF [±]
MSG.=07734
9. Press { { { { SET} } } } .
L The unit will dial the stored number.
10. Check that your pager received the pager
test call.
11. Press { { { { DIGITAL SP-PHONE} } } } .
Note:
L If you have subscribed to a Caller ID service,
instead of the message you entered in step 8,
your pager will display the caller's telephone
number.
Option
85