Introduction - Siemens SIMATIC ET 200SP Manual

Introduction

Purpose of the documentation
This manual supplements the system manual ET 200SP distributed I/O system
(https://support.automation.siemens.com/WW/view/en/58649293).
Functions that generally relate to the system are described in this manual.
The information provided in this manual and in the system/function manuals supports you in
commissioning the system.
Conventions
CPU: When the term "CPU" is used in this manual, it applies to the CPUs of the S7-1500
automation system as well as to the CPUs/interface modules of the distributed I/O system
ET 200SP.
STEP 7: In this documentation, "STEP 7" is used as a synonym for all versions of the
configuration and programming software "STEP 7 (TIA Portal)".
Please also observe notes marked as follows:
NOTE
A note contains important information on the product described in the documentation, on
the handling of the product or on the section of the documentation to which particular
attention should be paid.
ID link for the digital nameplate
The ID link is a globally unique identifier according to IEC 61406, which you will find in the
future as a QR code on your product and the product packaging.
The figure shows an example of an ID link for the BusAdapter RJ45.
You can recognize the ID link by the frame with a black frame corner at the bottom right. The
ID link takes you to the digital nameplate of your product.
Scan the QR code on the product or on the packaging label with a smartphone camera,
barcode scanner, or reader app. Call the ID link.
8
Equipment Manual, 10/2022, A5E41449003-AC
1
BusAdapter