Siemens SIMATIC ET 200SP Manual page 73

BusAdapter BA LC/FC installed
①
②
③
Figure 13-2 Connecting the BusAdapter BA LC/FC to the interface module
NOTE
Installation guidelines for modules with Industrial Ethernet/ PROFINET interfaces
Ensure that all devices are connected to the SELV/PELV power supply (or equivalent). Only
then are you permitted to operate the modules with Industrial Ethernet/ PROFINET interfaces
in LAN networks (Local Area Networks).
A data transfer point that guarantees this degree of safety is prescribed for connection to the
WAN (Wide Area Network).
BusAdapter
Equipment Manual, 10/2022, A5E41449003-AC
Interface module
BusAdapter BA LC/FC
Industrial Ethernet/PROFINET connecting cable
BusAdapter BA LC/FC
13.2 Connecting
73