Siemens SIMATIC ET 200SP Manual page 22

BusAdapter BA 2xFC
5.2 Connecting
To connect PROFINET IO to the PROFINET device via the BusAdapter BA 2xFC, follow these
steps:
1. Strip insulation from the sheath of the PROFINET connecting cable as follows:
Figure 5-2 PROFINET connecting cable
2. Pull back the locking slide and fold up the cover of the connection element.
①
3. Pull up the wire guide as far as it will go.
②
22
Locking slide
Wire guide
Equipment Manual, 10/2022, A5E41449003-AC
BusAdapter