PRESONUS StudioLive 16.0.2 Owner's Manual page 63

7 Software: Universal Control, SL Remote, Capture & Studio One Artist
7.5 Studio One Artist Quick Start
In the Send To drop-down menu, select the MIDI interface output
from which Studio One Artist will send MIDI data to your keyboard.
If your keyboard controller does not need to receive MIDI data
from Studio One (say, for moving motorized faders and the like),
you can leave this unselected. If your keyboard does need to
receive MIDI data, you must connect a MIDI cable from the MIDI
Out of the MIDI interface to the MIDI In of the keyboard.
9. If this is the only keyboard that you will use to control your external
synthesizers and virtual instruments, you should check the box next to
Default Instrument Input. This will automatically assign your keyboard
to control all MIDI devices in Studio One Artist.
Click OK.
If you have a sound module you'd like to connect, leave the External
Devices window open, and proceed to the next part of this section.
If not, you can close this window and skip to Section 7.4.4.
Setting up an External MIDI Sound Module from the Start Page
MIDI instrument controllers (keyboards, MIDI guitars, etc.) send
musical information in the form of MIDI data to tone modules, which
respond by generating sound, as instructed. Tone modules can be
standalone sound devices or can be integrated into a MIDI instrument,
such as a keyboard synthesizer. Studio One Artist refers to all tone
generators as Instruments. Once you have set up your MIDI keyboard
controller, take a moment to configure your sound module.
118 118
PreSonus StudioLive ™ 16.0.2
1. Connect the MIDI In of your external sound module
to the MIDI Out of your MIDI interface.
2. In the External Devices window, click the Add
button.
Owner's Manual
Software: Universal Control, SL Remote, Capture & Studio One Artist
6. In the Send To drop-down menu, select the MIDI-interface output from
which Studio One Artist will send MIDI data to your sound module.
In the Receive From drop-down menu, select the MIDI-interface
output from which Studio One Artist will receive MIDI data from
your sound module. If your sound module will not need to send
information to Studio One, you can leave this unspecified.
Click OK and close the External Devices window. You are
now ready to start recording in Studio One Artist. The
rest of this Quick Start Guide will go over how to set up
a Song and will discuss some general workflow tips for
navigating through the Studio One Artist enviroment.
7
Studio One Artist Quick Start 7.5
3. The Add Device window will launch.
4. From the menu on the left, select "New
Instrument. " At this point, you can customize
the name of your sound module by entering
the manufacturer and device names.
5. Specify which MIDI channels will be used to
communicate with this keyboard. For most
purposes, you should select all MIDI channels. If
you are unsure of which MIDI channels to select, we
suggest you select all 16.
119 119