Sl Remote: Overview Page - PRESONUS StudioLive 16.0.2 Owner's Manual

7 Software: Universal Control, SL Remote, Capture & Studio One Artist
7.3 Using StudioLive Remote for iPad
7.3.2

SL Remote: Overview Page

The Overview page in StudioLive Remote corresponds directly with
most of the controls on the Overview Page in VSL. The following
parameters can be controlled and/or viewed from this page:
Channel and Main Volume
Channel and Main Select
Channel Mute
Channel and Master Metering
Channel Panning
Channel FireWire Return
Channel and Main Gate, Compressor, and EQ overview
Channel and Main Gate, Compresson, and EQ zoom
If you have labeled your channels using the Scribble Strip on the Overview
Tab in VSL, you will also be able to see your channel names.
POWER USER TIP: Because StudioLive Remote is a wireless controller for Virtual StudioLive, the
fastest way to get comfortable with StudioLive Remote is to get well acquainted with VSL.
80 80
PreSonus StudioLive ™ 16.0.2 Owner's Manual
Software: Universal Control, SL Remote, Capture & Studio One Artist
Bus Assignments Query Displays the bus assignments for a channel or bus.
Tap to open Bus Assignments Query Page and make changes.
Above each channel, you will find the Bus Assignments view. This displays
the current FireWire return and stereo linking for each channel.
To change a particular channel's FireWire return assignments, tap on the
display. This will open the Bus Assignments Query Page for that channel.
Pressing on the FireWire icon to activate the FireWire return. Any
selection made on this page is immediately displayed in its Bus
Assignment Query.
To close the page, press anywhere on the screen.
Fat Channel Microviews and Displays a Microview of the Gate, Compressor, and EQ.
Fat Channel Zooms
Tap to open the zoomed view and make changes.
Each Channel and Bus features a Microview of the Fat
Channel components. These Microviews allow you to see
whether a particular channel or bus has dynamics processing
enabled. If any of the dynamics processors in the Fat Channel
are turned off, its Microview will be grayed out.
To make changes to the Fat Channel dynamics processing, tap on
any of the Microviews. This will launch the Fat Channel zoomed view
with that component in focus; that is, if you tap on the EQ Microview,
the Fat Channel zoom will open with the EQ in focus. The zoomed
Fat Channel view corresponds directly to the Channel Tab in VSL.
You can switch between the dynamics components in the
zoomed Fat Channel view by swiping your finger to the left
or right. For example, if you launch the Gate Zoom and swipe
your finger to the left, the Fat Channel Zoom will focus on the
Compressor; swiping to the left again focuses the EQ.
To close the Fat Channel Zoom, tap on the "x" in the upper left-
hand corner. This will display the normal Overview page.
7
Using StudioLive Remote for iPad 7.3
81 81