7
Software: Universal Control, SL Remote, Capture & Studio One Artist
7.3
Using StudioLive Remote for iPad n
10. Create a password and type it in both the Network Key and
Confirm Network Key boxes. For the best security, include
letters, numbers, and punctuation. Then click "OK. "
11. Click "OK" again to save your changes.
Windows Vista
1. Open Start>Connect to.
2. Click "Set up a connection or network. "
3. Select "Set up a wireless ad hoc network" and click Next.
4. Enter the new network name such as "StudioLive. "
5. Enter a Security key or password. For the best security,
include letters, numbers, and punctuation.
6. Check "Save this Network. "
Windows 7
1. Open Start>Control Panel.
2. Click "Network and Internet. "
3. Click "Network and Sharing Center. "
4. Under "Change your networking settings, " click
"Set up a new connection or network. "
5. Select "Set up a wireless ad hoc (computer-to-computer) network. "
6. Click on "Next" twice.
7. Enter the network name such as "StudioLive. "
8. Select the Security WAP (or WEP).
9. Enter the Security key or password. For the best security,
include letters, numbers, and punctuation. Then click OK.
10. Check "Save this network. "
11. Click "Turn on Internet connection sharing. "
76
76
PreSonus StudioLive
™
16.0.2
Owner's Manual
Software: Universal Control, SL Remote, Capture & Studio One Artist
Mac OS X 10.5/10.6
1. On the Menu bar click on the Wireless Status Icon.
2. From the pull-down menu select "Create Network.... "
3. Give your Network a name, such as "StudioLive. "
4. If you would like set up a password (recommended),
check "Require Password. "
5. Create your password within the guidelines and click "OK. "
6. Once your network has been successfully created,
you will see it in your list of available networks.
STEP 2:
Connect your iPad™ to your Ad Hoc Network
1. Tap on the Settings icon in your iPad.
2. Tap on "Network. "
3. Tap on "Wi-Fi. "
4. Under "Choose a Network, " you should now see your ad
5. Tap on your newly created network to select it.
6. If you secured your network with a password,
7. Tap on the menu arrow to the right of your
8. Turn Auto-Join to "On. "
9. You are now ready to launch StudioLive Remote and mix on the go!
7
Using StudioLive Remote for iPad
7.3
hoc network in the list.
you will prompted to enter it.
network name to open its network settings.
77
77