Initial Settings; Auto Set Up - JVC HR-XVS20E Instructions Manual

INITIAL SETTINGS

Auto Set Up

Auto Channel Set/Auto Clock Set/
Auto Guide Program Number Set
After the 1 button on the unit or remote control is pressed
for the first time to power on the unit, by simply selecting
your country*, the Auto Set Up function sets the tuner
channels, clock** and Guide Program numbers
automatically.
* If you live in Belgium (BELGIUM) or Switzerland (SUISSE), you also
need to select your language.
** If you live in Hungary (MAGYARORSZÁG), Czech Republic
( C ESKÁ REPUBLIKA), Poland (POLSKA) or other countries in
Eastern Europe (OTHER EASTERN EUROPE), set the clock
manually.
Before starting, make sure of the following:
● The TV aerial cable should be connected to the unit.
● The unit's mains power cord should be connected to a
mains outlet.
● The TV should be set to its AV mode (with AV connection
pg. 12) or UHF channel 36 (with RF connection
pg. 12).
● Slide the TV/S-VHS/DVD switch to the right.
A
Turn on the unit.
Press 1 on the unit or remote control. The Country Set
display appears on the TV screen.
NOTE:
If you have connected your TV to
the unit with RF connection and
the on-screen display appearing
on UHF channel 36 looks
distorted, perform "Video
Channel Set" on page 86.
B
Select your country.
Press rt to move the
highlight bar (pointer) to your
country's name.
(Example) DEUTSCHLAND is
selected.
NOTES:
● If you have selected BELGIUM or SUISSE, go to step C.
● If you have selected MAGYARORSZÁG, CESKÁ REPUBLIKA,
POLSKA or OTHER EASTERN EUROPE, press OK. The Clock
Set screen appears. Set the clock manually (
go to step D.
● If you have selected any other country name, go to step D.
13
EN
pg. 84), then