Table of Contents
Advertisement
26
EN
Basic Recording
● Turn on the TV and select the video channel (or AV
mode).
● Slide the TV/S-VHS/DVD switch to the right.
OPERATIONS ON S-VHS DECK (cont.)
A
Load a cassette.
Insert a cassette with the record safety tab intact.
● The unit's power comes on automatically and the counter is
reset to 0:00:00.
B
Select the S-VHS deck.
On the unit
Press S-VHS/DVD repeatedly so that the S-VHS indicator
lights up.
On the remote control
Press S-VHS so that the S-VHS indicator lights up.
C
Choose a programme.
Press PR +/– or the number keys to select the channel
you wish to record.
D
Set the tape speed.
Press SP/LP/EP (p). The current setting appears on the
front display panel or TV screen. Press SP/LP/EP (p)
again to change the setting while the tape speed is
displayed on the TV screen.
● In EP mode, the recording time is extended three times.
● If you record a programme in EP mode on the unit, it is
recommended to play back the EP-recorded tape on the unit.
● It is not possible to select EP mode if "COLOUR SYSTEM" is
set to "MESECAM". (
pg. 74)
E
Start recording.
Press and hold
7
and press
press
7
on the unit.
● If "O.S.D." is set to "ON" (
screen while an index code is being marked.
● When "DIRECT REC" is set to "ON" (
any button just after pressing 7 on the unit (or 7 and 4 on
the remote control), the unit may not function properly.
B.E.S.T. takes place at the beginning of both the first SP and
the first LP (or EP) recording after inserting the cassette.
(
pg. 29)
If "DIRECT REC" is set to "ON", the programme that appears
on the TV screen will be recorded. (
F
Pause/Resume recording.
Press 9. Press 4 to resume recording.
● You can select channel during the Record Pause mode.
G
Stop recording.
Press 8. Then press x on the S-VHS deck to remove the
cassette.
4
on the remote control, or
pg. 72), "MARK" blinks on the
pg. 72), if you press
pg. 72)
Advertisement
Table of Contents
