Description
3.2 Field module with OXYMAT 7 analyzer module
The following connections are located underneath the field module:
• Gas connections
• Factory-fitted cable for the electrical and data connection to the field control unit.
Note
Installation/removal of the analyzer module
The analyzer module is permanently installed in the field module housing. The analyzer module
is not supposed to be installed or uninstalled. If necessary, replace the complete field module.
Contact your service technician.
Figure 3-2
Connections on the field module
①
②
③
④
⑤
⑥
⑦
Figure 3-3
All inlets/outlets are provided with flame arresters. The module housing is vented by the
breathing apparatus to prevent condensation in the housing.
16
Field module: Schematic representation
Sample gas outlet
Sample gas inlet
Breathing apparatus (pressure compensation coupling)
Ground connection
Cable bushing
Purging gas connection or blanking plug
Reference gas inlet
Field module: Connections
Operating Instructions, 05/2022, A5E35640463-07
Field device