Panasonic Toughbook CF-Y4HWPZZBM Operating Instructions Manual page 51

Reinstalling
1
Connect the AC adaptor.
Do not interrupt the reinstallation procedure before completion, for example
by turning off the computer or pressing the Ctrl + Alt + Del key, as this
may prevent Windows from starting up, or may cause data to be lost so that
the reinstallation procedure cannot be executed.
2
Change the settings in the Setup Utility.
Make the following settings.
Return settings to the status at the time of purchase.
Change settings to enable startup from DVD-ROM & CD-R/RW drive.
If you change the settings from that at the time of purchase, we recommend
that you make a note of the settings that are changed.
A Turn on the computer, and press the F2 key while [Panasonic] boot
screen is displayed.
The Setup Utility will start up.
If the password has been set, enter the Supervisor Password, and
press the Enter key.
B Press the F9 key.
At the confirmation message, select [Yes] and press the Enter key.
C Select the [Boot] menu, then select [USB CDD] and press the F6 key until
[USB CDD] is at the top of [Boot priority order].
D Place the Product Recovery DVD-ROM into the DVD-ROM & CD-R/RW
drive.
When the disk cover does not open:
[CD/DVD Drive Power] has been set to [Off] in the [Main] menu. Per-
form the following procedure.
Press the F10 key. At the confirmation message, select [Yes] and
press the Enter key. (The computer will restart)
Press the F2 key while [Panasonic] boot screen is displayed.
Place the Product Recovery DVD-ROM, and execute step E.
E Press the F10 key.
At the confirmation message, select [Yes] and press the Enter key.
The Setup Utility will close, and the computer will restart.
If the password has been set, enter the Supervisor Password, and
press the Enter key.
3
Use the Product Recovery DVD-ROM to execute reinstalla-
tion.
A Press the 1 key to execute [1. [Recovery]].
(All of the screens below are only examples.)
51