Panasonic Toughbook CF-Y4HWPZZBM Operating Instructions Manual page 33

Password on boot
• Select whether you will need to input ([Enable]) or not ([Disable]) the Supervisor Password
or the User Password on booting.
SD Startup
• Select whether to use an SD memory card instead of entering the password on booting
([Enable]) or not ([Disable]).
• When registered SD memory card, this is set to [Enable].
• Cannot be set when [Password on boot] is set to [Disable].
SD Setting Method
• Select whether to set an SD memory card to [Leave Set] or [Set and Eject] when an SD
memory card is used instead of entering the password.
• This can be set only if [SD Startup] has been set to [Enable].
• Cannot be set when [Password on boot] is set to [Disable].
Clear registered SD card
• Clear the registration from all registered SD memory cards not to be used instead of enter-
ing the password on booting.
Set Supervisor Password
• Set a Supervisor Password if you wish to prevent any unauthorized changes to the Setup
Utility settings, also if you require a password on boot, set [Password on boot] to [Enable]
after you set Supervisor Password.
Setup Utility Prompt
• Select whether to display ([Enable]) or not to display ([Disable]) the message "Press F2 for
Setup/F12 for LAN" shown on the bottom of the [Panasonic] boot screen that is displayed
after starting this computer.
Boot First Menu
• Select whether to display "Boot Menu" ([Enable]) or not ([Disable]). (
Hard Disk Lock
• Select whether to enable ([Enable]) or disable ([Disable]) the [Hard Disk Lock].
• This function will not work without the Supervisor Password being set.
User Password Protection
• Select whether to permit changing the User Password ([Protected]) or not ([No Protec-
tion]).
Set User Password
• Set User Password when multiple users use this computer, etc.
For example, when the system administrator sets Supervisor Password and User Pass-
word and lets other users know only the User Password, other users cannot change some
of the settings in Setup Utility.
• This function will not work without the Supervisor Password being set.
Boot Menu
In the [Boot] menu, the names of the connected devices (including internal devices) will be displayed.
"USB CDD: MATSHITA UJDA7XX XXXX" is the internal DVD-ROM & CD-R/RW drive.
To move a device up by one, select the device in [Boot priority order] using the
To move a device down by one, select the device in [Boot priority order] using the
Panasonic USB floppy disk drive (CF-VFDU03 (optional)) can be used for startup (recommended).
To return the startup order to the default settings, press the 1 key.
(The order of default settings is: USB FDD->IDE HDD->USB CDD->PCI LAN)
(An underline indicates the factory default settings)
page 34).
key, and press the F6 key.
or
key, and press the F5 key.
or
Disable
Enable
Disable
Enable
Leave Set
Set and Eject
To the sub-menu
To the sub-menu
Disable
Enable
Disable
Enable
Disable
Enable
No Protection
Protected
To the sub-menu
33