Using The Touch Pad - Panasonic Toughbook CF-Y4HWPZZBM Operating Instructions Manual

Using the Touch Pad

Use the touch pad to move the cursor on the screen and perform computer operations.
A. Work Surface (touch pad)
Function
Moving the Cursor
Tapping/Clicking
tapping
A right-click: Can only be performed by clicking the right button.
Double-Tapping/
Double-Clicking
double-tapping
Dragging
Two quick taps, but on the second tap leave your finger down
(applying pressure) and move it on the work surface.
or
While holding down the button, move your finger on the work surface.
Vertical Scroll /
Horizontal Scroll
Trace a circle around the touch pad. A setting is required before
using the horizontal scrolling function. (
in onscreen Reference Manual)
NOTE
You can change the speed of the double-click or the operations of mouse but-
tons using [Mouse Properties] screen.
• To display [Mouse Properties]:
Click [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse].
When using the touch pad, keep the following in mind.
• By design the touch pad is to be used with a finger tip only. Do not place any
object or press down forcefully with sharp-pointed objects, i.e. finger nails,
pencils, or pens on the work surface.
• Try to avoid having any harmful substances, such as oil, come in contact with
the touch pad. The cursor may not work properly in such cases.
When the cursor doesn't move the way you want it to
Sensitivity when touching the touch pad can be adjusted.
( "Using the Touch Pad" in onscreen Reference Manual)
When an external mouse is connected and the cursor does not operate properly:
In the [Main] menu of the Setup Utility, set [Touch Pad] to [Disable]. When you
want to use the touch pad again, return the setting to [Enable]. (
B. Left Button C. Right Button
Operation
Move the tip of your finger lightly over the work
surface.
or clicking
or double-clicking
"Using the Touch Pad"
page 31)
25