Table of Contents
Advertisement
Chapter 1
Introduction
Key Features
• Substation Rated:
▪ IEC 61850-3
▪ IEEE 1613
▪ -40 to 85 °C (-40 to 185 °F) operating (no fans)
• Industrial Design:
▪ Panel or DIN mounting
▪ Lightweight Cast Aluminum Enclosure
▪ LED indicators for link and activity aids in field troubleshooting
• Performance:
▪ Configuration free, plug and play operation
▪ 802.3at/af compliant or RM version for connection to RUGGEDCOM WiN products
▪ Rated up to 36 W at 24 V+ input (RP110-LO_RM Only)
Section 1.2
Ports, Controls and Indicator LEDs
The RP110 features various ports, controls and indicator LEDs on the front panel for configuring and
troubleshooting the device.
Figure 1: Front Panel
1. RS232/RS422/RS485 Serial Terminal
RS232/RS422/RS485 Serial Terminal
Power Indicator LEDs
Alarm Indicator LED
2
1
2
2. Power Indicator LEDs
3. Alarm Indicator LED
The RS232/RS422/RS485 serial terminal serves a dual purpose:
• The RS232 terminals allow for a direct interface with the device to access initial
management functions.
• The RS422/RS485 terminals allow for half or full duplex serial connections respectively.
The power indicator LED illuminates when power is being supplied to the device.
The alarm indicator LED illuminates when an alarm condition exists.
3
4
4. Port Status Indicator LEDs
Ports, Controls and Indicator LEDs
RUGGEDCOM RP110
Installation Guide
Advertisement
Table of Contents
