Table of Contents
Advertisement
SC-F6400 Series/SC-F6400H Series
Caution:
❏ During maintenance, wear protective clothing,
including protective eyewear, gloves, and a
mask.
Should ink, waste ink, or ink cleaner come
into contact with your skin or enter your eyes
or mouth, take the following actions:
❏ If fluid adheres to your skin, wash it off
using large volumes of soapy water. If you
notice any reaction developing in the
affected area, consult with a qualified
physician immediately.
❏ If ink gets into your eyes, wash them out
immediately with water. Failure to
observe this precaution could result in
bloodshot eyes or mild inflammation.
Consult with a qualified physician if any
other problems should develop.
❏ If fluid enters your mouth, consult with a
physician as soon as possible.
❏ If swallowed, do not induce vomiting.
Consult with a physician as soon as
possible. If vomiting is induced, vomited
material may enter the windpipe, which is
dangerous.
❏ Store ink supply units, waste ink, and ink
cleaner in a location out of reach of children.
❏ Remove the media from the printer before
proceeding.
❏ Never touch the belts, circuit boards, or any parts
that do not require cleaning. Failure to observe
this precaution could result in malfunction or
reduced print quality.
❏ Do not use anything other than the supplied or
consumable cleaning stick. Other types of stick
that produce lint will damage the print head.
❏ Always use fresh cleaning sticks. Re-using sticks
can make stains even harder to remove.
❏ Do not touch the tips of the cleaning sticks. Oil
from your hands could damage the print head.
❏ Do not use anything other than the ink cleaner
specified to clean the capping station or the wiper.
Using anything else could result in malfunction or
reduced print quality.
User's Guide
Maintenance
❏ Touch a metallic object before starting work to
55
discharge any static electricity.
Advertisement
Table of Contents
